Mark the centres before sewing
Button spacing, with a position for every centre.
Choose the first and last button centres along a straight opening, then divide the span into equal intervals. This tool calculates positions; it does not choose the right button count or solve gaping and garment fit.
Your centre positions
The calculation
Let L be the opening length, a the first centre's top offset, b the last centre's bottom offset, and n the number of centres.
spacing = (L − a − b) ÷ (n − 1)centre i = a + i × spacing, for i = 0 through n − 1.
In the example, (60 − 3 − 3) ÷ (7 − 1) = 9 cm. The centres are 3, 12, 21, 30, 39, 48 and 57 cm from the top. There are six intervals between seven buttons.
Before transferring the marks
Check the pattern's closure instructions. Pin or baste the placement on a sample, consider button diameter, buttonhole length, seam allowances and areas under tension, then remeasure the marks. Round only when marking with your ruler; repeated rounded intervals can accumulate error.
Keep the original readings and units together using Sewlore's measurement methods guide.
Download the worked diagram
Download the original SVG example to adapt for a lesson. The diagram follows the repository MIT licence; retain its copyright and licence notice when reusing it. Its measurements are hypothetical.
Embed this tool in a sewing lesson
Copy this iframe into a page that supports HTML. Attribution is optional; you can adjust the link text and its rel attribute to your publication's policy. No tracking code is included.